for folding and gluing of pre-punched card boards.
The machine has been adjusted for the cartons width and length and is complete running:
The operator programs the electronic counter:
Counter 1: total quantity
Counter 2: cartons per staple
The operator drives down the table, fills it with cardboards and drives it up into working height. Than he takes a car board, folds the right site and slightly the left side and gives it into the machine. The machine is now working full automatic.
The cardboard runs under the glue head. The light barriers switch on the glue process as preset and stop it again. The slide on the le􀅌 side folds the carton.
The carton is transported by the belts through the pressure shafts. A light barrier counts the carton. Than the carton runs into a holding and is hold in position by a fork from the back and are clinched by the clinch plate from front and the clinch unit from top.
When the number of cartons in the staple is reached, the holding fork falls back and the carton staple is gliding onto a transport belts to the end of the machine and glides over the end plate on an additional table for further processing.
A light barrier detects, when the end of the staple passes and the holding gable comes up again.
The operator continues to give cartons into the machine. The table is controlled by a light barrier and follows automatically.
When the total amount is reached a loud sound comes up for 3 seconds and the machine stops.
Дата последнего обновления: 20171230221621 Дата занесения информации в каталог: 2004-06-12 19:58:19